WP20 · Draft web edition · as of 2026-10-30
Digital printing, three-dimensional sampling and on-demand manufacturing for local apparel
Each weft is one exhibit's own data, normalised; each warp group is a chapter. The probe reads the exhibit's own value where it crosses. Procedural visualisation, not a measurement.
Operate the evidence first
The weft the probe was reading, lifted out of the cloth: the same exhibit at full size, with the probe as its cursor. Choose a weft, step through it, compare its series.
Read-out
Inherited source-text baseline. Original publication date not recorded. Shares are approximate and sum to 100 percent. They do not describe seed-cotton production, garment sales, installed capacity or a GFT result.
Unit: approximate percent of cotton fibre. Status: sourced. Sources: R06.
Read this exhibit in its chapter ↗Read-out
Illustrative GFT change-control matrix informed by ink-substrate dependencies (S01), ISO 6330 care testing scope (S12), Fogra digital print process control (S21) and ZDHC MRSL chemical input management (S23). Scale: 0 = no new check, 1 = operator spot check, 2 = technical lead re-test, 3 = mandatory order hold and full requalification. Scores are normative GFT control rules, not empirical defect rates.
Unit: illustrative re-verification level (0 to 3). Status: illustrative. Sources: S01, S12, S21, S23. Illustrative figures are teaching examples, not measured factory results.
Read this exhibit in its chapter ↗Read-out
Illustrative order-cohort contribution bridge in thousand CFA francs (XAF), constructed by GFT to demonstrate recovery-cost accounting (S03, S28). All monetary values are illustrative model inputs, not observed GFT revenues or local price quotes.
Unit: thousand XAF per illustrative order cohort. Status: illustrative. Sources: S03, S28. Illustrative figures are teaching examples, not measured factory results.
Read this exhibit in its chapter ↗Read-out
Illustrative GFT review positions, not observed performance. Horizontal position is completeness of the proposed evidence file, where 0 is absent and 10 is complete. Vertical position is risk that the claim moves or omits burdens, where 0 is low and 10 is high. Scores are author-assigned for method demonstration only.
Unit: illustrative screening score from 0 to 10. Status: illustrative. Sources: S19, S23, S26. Illustrative figures are teaching examples, not measured factory results.
Read this exhibit in its chapter ↗The paper's argument
Chapter read-out · hover or focus a thread
Cameroon apparel entrepreneurs and production managers, Technical designers, patternmakers and quality leads, Institutional apparel buyers and local design businesses, Industrial programme sponsors and equipment procurement teams
0125 min · 4 exhibits
Local value starts with a garment that can be reordered
GFT argues for a measured order-to-garment service that reduces speculative commitments while retaining physical proof of quality.
01 / 05The thesis
GFT argues that local apparel makers should combine qualified digital printing with calibrated digital sampling and order-triggered production only where physical approval, reliable fulfilment and retained-order economics justify each stage of adoption.
14 chapters · 4 parts · 365 minutes
Prepared for: Cameroon apparel entrepreneurs and production managers, Technical designers, patternmakers and quality leads, Institutional apparel buyers and local design businesses, Industrial programme sponsors and equipment procurement teams
02 / 05Part I · Confirm the order before choosing the machine
Digital printing, three-dimensional sampling and order-triggered manufacturing can help a local apparel maker delay commitments until the buyer has approved a product. Their value depends on a complete operating system: qualified materials, valid patterns, credible fit simulation, physical tests, controlled production release and reliable fulfilment. Buying a printer or producing an attractive render does not establish that system.
Part I · chapters 01 to 03 · 91 minutes · 13 exhibits
03 / 05Part II · Make the digital sample physically accountable
This paper argues for a bounded service built around repeatable orders rather than speculative collections. It distinguishes decoration of stocked blanks from printed-fabric cut-and-sew and made-to-measure manufacture. It compares print routes against fibre compatibility, finishing requirements and accepted-output economics. It then connects calibrated digital materials and representative avatars to physical fit, colour and care approval.
Part II · chapters 04 to 07 · 100 minutes · 18 exhibits
04 / 05Part III · Prove the service and the economics
The economic method includes training, software, residual samples, idle maintenance, remakes, refunds and delivery. Environmental comparisons state their boundaries and avoid transferring overseas case results into Cameroon savings claims. GFT's Cameroon textile programme supplies the greenfield operating concept and performance-management discipline. Public research, standards catalogue scopes, institutional guidance and manufacturer documentation provide the external research base, with their limitations stated.
Part III · chapters 08 to 11 · 97 minutes · 16 exhibits
05 / 05Part IV · Buy, pilot and scale against evidence
The closing pilot protocol separates calibration from validation and advances capability only when agreed evidence gates pass. The result is a practical research and decision framework for local apparel production, not a claim that GFT has installed or proved an on-demand factory.
Part IV · chapters 12 to 14 · 77 minutes · 13 exhibits
The cloth seen from above
Weaving draft · 14 chapters × 60 exhibits
One column per chapter, one knot per exhibit; the glyph is its type family, as on the chips above. Select a knot to open the exhibit below.
Exhibit 01 · chapter 01 · Stacked composition
Read-out
Inherited source-text baseline. Original publication date not recorded. Shares are approximate and sum to 100 percent. They do not describe seed-cotton production, garment sales, installed capacity or a GFT result.
Unit: approximate percent of cotton fibre. Status: sourced. Sources: R06.
Read this exhibit in its chapter ↗Read-out
Interlude · findings against chapters
On-demand manufacturing changes the order and production system, while digital printing changes one process within it.S01S03
Decorating imported blanks can create local service value without demonstrating local cotton-fibre transformation.R06R07S15
Print routes must be selected against the substrate, pretreatment, fixation, quality and service requirement.S01S02S15S30
A valid digital garment needs manufacturable pattern geometry, measured material behaviour and a suitable avatar.S04S05S09S13S32
Physical fit and care testing remain necessary release evidence within the proposed adoption method.S06S07S08S10S11S12S27
Sample reductions create value only after digital workflow costs and residual physical validation are counted.S04S07S16
Low order volume does not remove maintenance, consumable supply or curing-capacity dependencies.S15S17S30S31
Smaller speculative stock is insufficient evidence of lower whole-system environmental impact.S19S20S25S26
A credible delivery promise must include approval, recovery, assembly and acceptance rather than printer completion alone.S01S28
A matched pilot with held-out styles and pre-agreed gates should decide which service expands.S04S07S18S29
Cell strength is the recurrence of each finding's key terms in each chapter's text, computed from this web edition and scaled to the strongest chapter. It is a reading guide, not a citation.
Evidence stays attached
Every knot on the edge is one of the 204 records the chapters cite, sorted by grade. The counters filter them; select a record to read it and to light the chapters that cite it. A grade describes the supplied evidence record, not independent validation by the website; missing references are excluded.
All 204 records shown
c01-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S13 · Grade A
ISO 8559-1:2017: Anthropometric definitions for body measurement
ISO 8559-1:2017 provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases.
2017. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S14 · Grade A
ISO 13655:2017: Spectral measurement and colorimetric computation for graphic arts images
It also specifies procedures for computation of colorimetric parameters for graphic arts images.
2017. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S28 · Grade A
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S29 · Grade A
Due diligence essentials for responsible garment and footwear
Each company is expected to identify its priority risk areas based on its individual circumstances, including risks not listed here.
2026-02-26. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S14 · Grade A
ISO 13655:2017: Spectral measurement and colorimetric computation for graphic arts images
It also specifies procedures for computation of colorimetric parameters for graphic arts images.
2017. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S21 · Grade A
Certifications of Digital printing
It comprises recommendations, instructions for action as well as target values and tolerances for the digital print production customary in the industry.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S22 · Grade A
Display calibration
Since displays tend to drift over time, periodic calibration is needed to maintain colour performance.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S27 · Grade A
ISO 3759:2011: Preparation, marking and measuring of fabric specimens and garments for dimensional change
ISO 3759:2011 is applicable to woven and knitted fabrics and made-up textile articles.
2011. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S0401 · Grade A
ICC Specifications
The ICC specification defines the file format for profiles that connect between colour encodings.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S0402 · Grade A
Profile Library
The ICC is unable to recommend profiles for particular applications, and accepts no responsibility for the performance of these profiles.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S13 · Grade A
ISO 8559-1:2017: Anthropometric definitions for body measurement
ISO 8559-1:2017 provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases.
2017-03. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c06-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c06-S27 · Grade A
ISO 3759:2011: Preparation, marking and measuring of fabric specimens and garments for dimensional change
ISO 3759:2011 is applicable to woven and knitted fabrics and made-up textile articles.
2011. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S13 · Grade A
ISO 8559-1:2017: Anthropometric definitions for body measurement
ISO 8559-1:2017 provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases.
2017. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S27 · Grade A
ISO 3759:2011: Preparation, marking and measuring of fabric specimens and garments for dimensional change
ISO 3759:2011 is applicable to woven and knitted fabrics and made-up textile articles.
2011. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S28 · Grade A
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S14 · Grade A
ISO 13655:2017: Spectral measurement and colorimetric computation for graphic arts images
It also specifies procedures for computation of colorimetric parameters for graphic arts images.
2017. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S27 · Grade A
ISO 3759:2011: Preparation, marking and measuring of fabric specimens and garments for dimensional change
ISO 3759:2011 is applicable to woven and knitted fabrics and made-up textile articles.
2011. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S28 · Grade A
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S10 · Grade A
ISO 105-C06:2010: Colour fastness to domestic and commercial laundering
Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
2010. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S11 · Grade A
ISO 105-X12:2016: Colour fastness to rubbing
Two tests may be made, one with a dry rubbing cloth and one with a wet rubbing cloth.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S12 · Grade A
ISO 6330:2021: Domestic washing and drying procedures for textile testing
A complete test consists of a washing and drying procedure.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S26 · Grade B
Environmental performance of future digital textile printing: Case study Printscorpio
When smaller printing batches are studied, digital printing causes less greenhouse gas emissions than screen printing.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S28 · Grade B
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S02 · Grade B
Textile printing: An integrated view of processes, properties, and future prospects
However, due to its high complexity, rotary printing requires great technical knowledge.
2024-01-29. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S05 · Grade B
The Influence of Textile Materials Mechanical Properties upon Virtual Garment Fit
It was defined that for diagonal cut garments the highest influence upon garment fit has fabric tensile properties in weft direction.
2011-07-04. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S06 · Grade B
Comparative Study of Real and Virtual Garments Appearance and Distance Ease
Distance ease of virtual and scanned garments was compared in bust and waist cross-sections.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S18 · Grade B
Environmental and Social Management System Implementation Handbook: Textiles and Apparel
You can use the Risk Assessment Form to prioritize which risks should be addressed first.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S20 · Grade B
Rethinking business models for a thriving fashion industry
To successfully develop circular business models, their revenue must be decoupled from production and resource use.
2021-11-23. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S22 · Grade B
Display calibration
Since displays tend to drift over time, periodic calibration is needed to maintain colour performance.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S23 · Grade B
Roadmap to Zero: Manufacturing Restricted Substances List
It establishes which ones to avoid, in particular those banned from intentional use.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S0201 · Grade B
Low-cost 3D human body reconstruction under limited views and girth measurement for the apparel customisation
To enhance the convenience of human body 3D modelling, this study proposes a low-cost method for 3D body reconstruction under limited views, aiming to easily acquire client body size information through smart phone photography.
2025-01-08. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S0202 · Grade B
A novel approach in predicting virtual garment fitting sizes with psychographic characteristics and 3D body measurements using artificial neural network and visualizing fitted bodies using generative adversarial network
3D body measurements, garment sizes, and ease allowance are the necessary factors to ensure end-user satisfaction in the apparel industry.
2023-07-08. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S0203 · Grade B
Applying an eMASS Customization Program as a Research Tool to Evaluate Consumer Benefits
An online survey company in South Korea recruited 290 female apparel shoppers who purchased apparel online.
2019-09-27. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S02 · Grade B
Textile printing: An integrated view of processes, properties, and future prospects
However, due to its high complexity, rotary printing requires great technical knowledge.
2024-01-29. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S18 · Grade B
Environmental and Social Management System Implementation Handbook: Textiles and Apparel
You can use the Risk Assessment Form to prioritize which risks should be addressed first.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S21 · Grade B
Certifications of Digital printing
It comprises recommendations, instructions for action as well as target values and tolerances for the digital print production customary in the industry.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S23 · Grade B
Roadmap to Zero: Manufacturing Restricted Substances List
It establishes which ones to avoid, in particular those banned from intentional use.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S24 · Grade B
Development of Binder-Free Pigment Inks for Direct Inkjet Printing on Cotton Fabric without Pretreatment
Additional chemical treatment generates a large amount of wastewater and complicates the process.
2023-04-18. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S26 · Grade B
Environmental performance of future digital textile printing: Case study Printscorpio
When smaller printing batches are studied, digital printing causes less greenhouse gas emissions than screen printing.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S0301 · Grade B
Drying-free inkjet printing of cotton fabrics through controlling the diffusion of dye inks in wet sodium alginate films
Natural polymer pretreatment was the essential process to enhance the quality of textile inkjet printing.
2025-03-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S0302 · Grade B
Modifying Cotton Fabric Properties by Controlling HPMC Viscosity Grade to Limit Ink Spreading and Penetration
In cotton fabric inkjet printing, the spreading and penetration of the ink seriously damage printing resolution and color strength.
2024-08-19. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S02 · Grade B
Textile printing: An integrated view of processes, properties, and future prospects
However, due to its high complexity, rotary printing requires great technical knowledge.
2024-01-29. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S23 · Grade B
Roadmap to Zero: Manufacturing Restricted Substances List
It establishes which ones to avoid, in particular those banned from intentional use.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S24 · Grade B
Development of Binder-Free Pigment Inks for Direct Inkjet Printing on Cotton Fabric without Pretreatment
Additional chemical treatment generates a large amount of wastewater and complicates the process.
2023-04-18. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S08 · Grade B
Designing Personalized Garments with Body Movement
Our method explicitly incorporates transitions between various body poses to ensure a better fit and freedom of movement.
2021-02-10. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S29 · Grade B
Due diligence essentials for responsible garment and footwear
Each company is expected to identify its priority risk areas based on its individual circumstances, including risks not listed here.
2026-02-26. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c05-S33 · Grade B
Towards Garment Sewing Pattern Reconstruction from a Single Image
Then, we propose a two-level Transformer network called Sewformer, which significantly improves the sewing pattern prediction performance.
2023. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c06-S04 · Grade B
Comparative study of physical and virtual fabric parameters: physical versus virtual drape test using commercial 3D garment software
The last phase investigates the effect of particle distances on virtualized fabric.
2025. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c06-S05 · Grade B
The Influence of Textile Materials Mechanical Properties upon Virtual Garment Fit
It was defined that for diagonal cut garments the highest influence upon garment fit has fabric tensile properties in weft direction.
2011-07-04. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c06-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S02 · Grade B
Textile printing: An integrated view of processes, properties, and future prospects
However, due to its high complexity, rotary printing requires great technical knowledge.
2024-01-29. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S04 · Grade B
Comparative study of physical and virtual fabric parameters: physical versus virtual drape test using commercial 3D garment software
The last phase investigates the effect of particle distances on virtualized fabric.
2025. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S05 · Grade B
The Influence of Textile Materials Mechanical Properties upon Virtual Garment Fit
It was defined that for diagonal cut garments the highest influence upon garment fit has fabric tensile properties in weft direction.
2011-07-04. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S06 · Grade B
Comparative Study of Real and Virtual Garments Appearance and Distance Ease
Distance ease of virtual and scanned garments was compared in bust and waist cross-sections.
2020-01-15. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S08 · Grade B
Designing Personalized Garments with Body Movement
Our method explicitly incorporates transitions between various body poses to ensure a better fit and freedom of movement.
2021-02-10. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S21 · Grade B
Certifications of Digital printing
It comprises recommendations, instructions for action as well as target values and tolerances for the digital print production customary in the industry.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S22 · Grade B
Display calibration
Since displays tend to drift over time, periodic calibration is needed to maintain colour performance.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S0701 · Grade B
A novel approach in predicting virtual garment fitting sizes with psychographic characteristics and 3D body measurements using artificial neural network and visualizing fitted bodies using generative adversarial network
However, designers find it challenging to recognize customers' motivations and emotions towards their preferred fit and define ease allowances in the virtual environment.
2023-07-08. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S0702 · Grade B
Use of nano-scale synthesized polyurethane acrylate as a binder in textile printing
But printed polyester and CO/PET fabrics show enhanced dry rubbing but lower wet rubbing fastness results, depending on the type of binder used.
2026-03-26. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S02 · Grade B
Textile printing: An integrated view of processes, properties, and future prospects
However, due to its high complexity, rotary printing requires great technical knowledge.
2024-01-29. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S05 · Grade B
The Influence of Textile Materials Mechanical Properties upon Virtual Garment Fit
It was defined that for diagonal cut garments the highest influence upon garment fit has fabric tensile properties in weft direction.
2011-07-04. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S09 · Grade B
Computational Pattern Making from 3D Garment Models
We propose a method for computing a sewing pattern of a given 3D garment model.
2022. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S18 · Grade B
Environmental and Social Management System Implementation Handbook: Textiles and Apparel
You can use the Risk Assessment Form to prioritize which risks should be addressed first.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S21 · Grade B
Certifications of Digital printing
It comprises recommendations, instructions for action as well as target values and tolerances for the digital print production customary in the industry.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S28 · Grade B
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S29 · Grade B
Due diligence essentials for responsible garment and footwear
Each company is expected to identify its priority risk areas based on its individual circumstances, including risks not listed here.
2026-02-26. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S0801 · Grade B
CUTTING ROOM SOFTWARE: ENHANCING EFFICIENCY IN GARMENT PRODUCTION
Particularly before cutting, checking model information is critically important.
2025-04-07. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S0802 · Grade B
Marker planning for fabric cutting with sewing schedule constraint in mass customization context
Hence, the objective is to minimize the total cost related to a number of markers and excessive units.
2016. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S02 · Grade B
Textile printing: An integrated view of processes, properties, and future prospects
However, due to its high complexity, rotary printing requires great technical knowledge.
2024-01-29. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S04 · Grade B
Comparative study of physical and virtual fabric parameters: physical versus virtual drape test using commercial 3D garment software
The last phase investigates the effect of particle distances on virtualized fabric.
2025. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S28 · Grade B
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S01 · Grade B
Digital Textile Printing: Status Report 2021
The fixation is operated only by dry heat.
2021. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S19 · Grade B
Sustainability and Circularity in the Textile Value Chain: A Global Roadmap
There is not yet a clear, agreed definition on overconsumption.
2023. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S20 · Grade B
Rethinking business models for a thriving fashion industry
To successfully develop circular business models, their revenue must be decoupled from production and resource use.
2021-11-23. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S23 · Grade B
Roadmap to Zero: Manufacturing Restricted Substances List
It establishes acceptable limits for each one and outlines which ones to avoid, in particular those banned from intentional use.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S25 · Grade B
On-Demand Knitting and Recycling: An LCA Study Investigating an Integrated Solution for Sustainable Woollen Jumpers
The environmental burden is measured via LCA using Idemat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c11-S26 · Grade B
Environmental performance of future digital textile printing: Case study Printscorpio
When smaller printing batches are studied, digital printing causes less greenhouse gas emissions than screen printing.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S18 · Grade B
Environmental and Social Management System Implementation Handbook: Textiles and Apparel
You can use the Risk Assessment Form to prioritize which risks should be addressed first.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S21 · Grade B
Certifications of Digital printing
It comprises recommendations, instructions for action as well as target values and tolerances for the digital print production customary in the industry.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S23 · Grade B
Roadmap to Zero: Manufacturing Restricted Substances List
It establishes which ones to avoid, in particular those banned from intentional use.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S04 · Grade B
Comparative study of physical and virtual fabric parameters: physical versus virtual drape test using commercial 3D garment software
The last phase investigates the effect of particle distances on virtualized fabric.
2025. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S05 · Grade B
The Influence of Textile Materials Mechanical Properties upon Virtual Garment Fit
It was defined that for diagonal cut garments the highest influence upon garment fit has fabric tensile properties in weft direction.
2011-07-04. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S06 · Grade B
Comparative Study of Real and Virtual Garments Appearance and Distance Ease
Distance ease of virtual and scanned garments was compared in bust and waist cross-sections.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S18 · Grade B
Environmental and Social Management System Implementation Handbook: Textiles and Apparel
You can use the Risk Assessment Form to prioritize which risks should be addressed first.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S25 · Grade B
On-Demand Knitting and Recycling: An LCA Study Investigating an Integrated Solution for Sustainable Woollen Jumpers
The environmental burden is measured via LCA using Idemat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S26 · Grade B
Environmental performance of future digital textile printing: Case study Printscorpio
When smaller printing batches are studied, digital printing causes less greenhouse gas emissions than screen printing.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S28 · Grade B
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S29 · Grade B
Due diligence essentials for responsible garment and footwear
Each company is expected to identify its priority risk areas based on its individual circumstances, including risks not listed here.
2026-02-26. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S03 · Grade B
On-Demand Manufacturing Technology in Textile and Fashion Industry
The findings suggest that on-demand manufacturing represents a structural transformation rather than a simple technological upgrade.
2025-12-31. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S07 · Grade B
Virtual Fit vs. Physical Fit: How Well Does 3D Simulation Represent the Physical Reality
It cannot fully replace a real physical fitting, since not all technical issues have been solved yet.
2020. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S17 · Grade B
Environmental, Health, and Safety Guidelines: Textile Manufacturing
Heat consumption is particularly significant in drying and curing operations and in activities involving wet treatments.
2007-04-30. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S18 · Grade B
Environmental and Social Management System Implementation Handbook: Textiles and Apparel
You can use the Risk Assessment Form to prioritize which risks should be addressed first.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S26 · Grade B
Environmental performance of future digital textile printing: Case study Printscorpio
When smaller printing batches are studied, digital printing causes less greenhouse gas emissions than screen printing.
2014. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S28 · Grade B
OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector
Three of the most common factors are low wages, inefficient production planning and poor purchasing practices.
2018. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S32 · Grade B
GarmentCode: Programming Parametric Sewing Patterns
Realistic representation of garments with valid sewing patterns is key to their accurate digital simulation and eventual fabrication.
2023-06-06. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S33 · Grade B
Towards Garment Sewing Pattern Reconstruction from a Single Image
Then, we propose a two-level Transformer network called Sewformer, which significantly improves the sewing pattern prediction performance.
2023. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c01-S16 · Grade C
How accurate are virtual fabrics?
However, the accuracy may differ when Fabrics' Physical Properties are arbitrarily modified.
2026-10-05. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c02-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c03-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c04-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
n.d.. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c06-S16 · Grade C
How accurate are virtual fabrics?
However, the accuracy may differ when Fabrics' Physical Properties are arbitrarily modified.
2026-10-05. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S16 · Grade C
How accurate are virtual fabrics?
However, the accuracy may differ when Fabrics' Physical Properties are arbitrarily modified.
2026-10-05. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c07-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c08-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S16 · Grade C
How accurate are virtual fabrics?
However, the accuracy may differ when Fabrics' Physical Properties are arbitrarily modified.
2026-10-05. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c09-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c10-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c12-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S15 · Grade C
Guide to printing on garments
The final stage is curing the inks using heat.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c13-S30 · Grade C
DTG and DTF Printers for Small Businesses
When using white ink or printing onto polyester, pre-treatment is necessary.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗c14-S31 · Grade C
SureColor F2270 User Guide: Shaking the Ink Packs
Shake the White ink supply units once a day, and shake the color ink supply units once a month.
2026. Register access date: 2026-10-30. Source provenance is supplied by the paper evidence register.
Open the recorded source ↗R03 · Grade C · inherited record
Inherited evidence R03
Company profile: more than 220,000 cotton producers supported in northern Cameroon; nine ginning plants; two oil mills.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R06 · Grade C · inherited record
Inherited evidence R06
About 95 percent of cotton fibre exported raw against 5 percent processed locally; industrialisation target of 50 percent local processing.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R07 · Grade C · inherited record
Inherited evidence R07
SND30 restates the 50 percent local-processing target by 2030.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R14 · Grade C · inherited record
Inherited evidence R14
Cameroon minimum wage (SMIG) XAF 41,875 a month in 2023, raised to XAF 43,969 a month from 23 February 2024, about US$76, a rise of 5 percent.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R15 · Grade C · inherited record
Inherited evidence R15
Average salary across sectors in Cameroon about US$359 a month.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R16 · Grade C · inherited record
Inherited evidence R16
Informal share of employment about 90 percent; standard 40-hour week, 48-hour maximum, overtime at 1.2 times.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R24 · Grade C · inherited record
Inherited evidence R24
Africa textile market about US$37.3 billion in 2025, projected US$49.41 billion by 2030 at 4.73 percent a year.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R25 · Grade C · inherited record
Inherited evidence R25
Africa textile market to about US$72.7 billion by 2035 at 6.9 percent a year; fashion and apparel 48.1 percent of the market in 2024.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R26 · Grade C · inherited record
Inherited evidence R26
Cameroon clothing and footwear spend about US$94.70 a person in 2024 and about 8.0 pieces a person; apparel eCommerce revenue US$20.32 million (2023) to US$33.61 million (2027) at 13.41 percent a year; user penetration 18.0 percent (2023) to 22.7 percent (2027).
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
R32 · Grade C · inherited record
Inherited evidence R32
CFA franc to US dollar reference rates; franc pegged to the euro at 655.957. The GFT study's method note places the franc near 590 to 610 per US dollar across the 2023 study window and near 563 to 577 more recently, and treats currency conversions as estimates.
Publication date unrecorded. Inherited source-text record. The original publication has not been independently reopened for this web edition.
Keep the definitions stable
44 terms, each with one definition for the whole paper. The punched row shows the chapters whose text uses the term.
Recurs inreading guide, not a citation
Cut to length
Chapters 01 to 02 fit in 60 minutes, with 7 minutes to spare.
Start chapter 01 · 2 chapters in 60 minWP20 · Draft web edition
Print on Demand, Sample on Screen
Cut length 2 chapters · 53 min
The PDF has passed its publication gates: 246 rendered A4 pages, 1.8 MB.
Download the verified PDFOn the same rack
WP01The Local-Processing GapWP02Measure Before You ModelWP03Seeing Every DefectRelated tools: Garment unit-economics and breakeven simulator, OEE and sewing-line simulator, Line-balancing studio
Issued by Green Future Tech Limited, Hong Kong SAR. This research is not investment, legal or tax advice. Illustrative calculations require local validation before an operating or financing decision.